RockyMounts In-Bed Track System for Bike Mounts - Select Truck
Zoom the image with the mouse

RockyMounts In-Bed Track System for Bike Mounts - Select Truck

$129.95
Brand

Related Products

Description

These track kits are truck specific, find your truck below for year range and fitment notes.

This black powder-coated aluminum track bolts into the pre-existing tie-down points located in the bed behind the cab.  The RockyMounts brackets allow for reattachment of the factory tie-down to maintain tie-down points.

The bike mounts can slide along the length of the track and be positioned anywhere.  If you have standard quick release bikes, get the LoBall (non-locking) or Locking LoBall (locking).  If you have thru-axles, get the HotRod (non-locking) or the DriveShaft HM (locking) - All bike mounts are sold separately.

CHEVROLET Silverado:
A 60” slotted track that bolts into the pre-existing tie-down holes located in the Chevy Silverado and GMC Sierra 2014-2019
Kit includes an aluminum 60” track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits

CHEVROLET Colorado:
A 47” slotted track that bolts into the pre-existing tie-down holes located in the Chevy Colorado and GMC Canyon 2015-2019
Kit includes an aluminum 47” track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits
Compatible with RockyMounts’ Driveshaft HM, Hotrod, and Loball product family (sold separately)

CHEVROLET Colorado PDF Instruction Manual [+]

FORD F-150:
Fits F150 body 2009 and on.  A 60" slotted bike rack that bolts into pre-existing tie-down points located in the Ford F150 (5.5' bed only, does not fit 6.5' Bed).  This kit includes an aluminum 60" track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits (to attach our fork mounts, sold separately). When you unbolt the tie-down, install our bracket behind it and re-install your tie-down (you do not lose tie-down).  Engineered specifically for this truck bed.  

FORD F-150 PDF Installation Instructions [+]

FORD Ranger:
Fits Ford Ranger 2019+.  A 60" slotted bike rack that bolts into pre-existing tie-down points located in the bed of the 2019 and on Ford Ranger.  This kit includes an aluminum 60" track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits (to attach our fork mounts, sold separately). Engineered specifically for this truck bed. 

On the 5' bed, you can only close the tailgate with road bikes.  The bed is very short (Tacomas and Colorados have 5.5' beds).  Most mountain bikes will require you to drive with the tailgate open.  There are some good bed extenders and nets offered for these trucks as dirt bikes and motorcycles have the same problem on the 5' bed. RockyMounts pushed the track forward as far as possible, so no adjustments can be made to close the tailgate.  

GMC Sierra:
A 60” slotted track that bolts into the pre-existing tie-down holes located in the Chevy Silverado and GMC Sierra 2014-2019
Kit includes an aluminum 60” track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits

GMC Canyon:
A 47” slotted track that bolts into the pre-existing tie-down holes located in the Chevy Colorado and GMC Canyon 2015-2019
Kit includes an aluminum 47” track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits
Compatible with RockyMounts’ Driveshaft HM, Hotrod, and Loball product family (sold separately)

GMC Canyon PDF Instruction Manual [+]

HONDA Ridgeline:
A 60" slotted track that bolts into the pre-existing tie-down points located in the new Honda Ridgeline (Gen 2, 2016-).  This kit includes a 60" track, mounting brackets to fasten to your bed, Torx tool, and two bike mount hardware kits (to attach our fork mounts, sold separately).  Engineered specifically for this truck bed for a perfect fit.  Our brackets include an integrated tie-down to maintain a tie-down point.  

HONDA Ridgeline PDF Instruction Manual [+]

Frequently asked questions:

Q: Which bike mounts should I get?
A: If your bikes have quick-release front wheels, get the LoBall or Locking Loball. If you have thru-axles, get the HotRod or DriveShaft HM.  If you have both, you can get a Dummy Axle for the DriveShaft HM to carry your QR bike, but the QR does not lock. 

Q: How many bikes can I hold?
A: Up to three. We include two bike mount hardware kits, but you can buy a third if need be. 

Q: Do I need to tie down the rear wheel?
A: Most likely no. The bed has some channels on the floor and bikes usually do not move around. If you drive like a rally car driver or take the vehicle off-road, it can be helpful to run a strap through the back wheel and though a tie-down point in the bed.

Q: Will this work with the factory tonneau cover?
A: No

Q: Why don't you include the fork mounts?
A: There are too many styles of forks on the market and it would be too expensive to include all the mounting possibilities (locking vs. non-locking, QR, thru-axle, one, two or three bikes?). We sell them separately so you get the best fork mount (or use your old ones) for your bike. 

Q: What does the bike mount hardware kit do?
A: It includes the square plates and bolts that slide into the track. If you purchase a HotRod, LoBall or DriveShaft HM, these will allow you to attach these fork mounts to the track. Do not get a DriveShaft Track as these do not work well in this orientation.

Q: Can I close the tailgate with the bike mounted?
A: Road bikes, always. Mountain bikes will depend on the wheelbase. Most fit, on ones with longer than a 45" wheelbase, you will have to angle the rear wheel towards the corner.

Q: Do you make a bike mount where I do not remove the front wheel?
A: No.

Q: Does it interfere with the trunk/cooler?
A: No, but with bikes mounted, yes. 

Q: Does the track lock to the truck?
A: No, it uses a T45 Torx tool which is uncommon, so the rack is unlikely to get stolen

Q: Is it easy to take in and out?
A: Easy, four bolts. We give you a tool, but a socket wrench with the correct bit will reduce the time in half. 

Q: What is it made of?
A: The track is 6061 aluminum, powder-coated matte-black, the brackets that attach the track to your mounting holes are 4mm thick 1080 steel, electroplated and powder coated black.

Q: I have never owned any RockyMounts, is this good quality and fit?
A: The fit is perfect, it will take five minutes to put the track in and another few minutes to install the bike mounts. Quality is great, no burrs, lines are smooth and the parts are precise to automotive standards for fit and finish.